Truck Ultrasonic Liquid Level Sensor Without Drilling Hole Accuracy 0.5% Ultrasonic Fuel Level Sensor manufacturer from China Shenzhen Keson Electronic Co., Ltd

Truck Ultrasonic Liquid Level Sensor Without Drilling Hole Accuracy 0.5%

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Ultrasonic Fuel Level Senso...

Without Drilling Hole Fuel Level Ultrasonic Liquid Level Sensor Realtime Fuel Level Monitoring Sensor For Truck

Without Drilling Hole Fuel Level Ultrasonic Liquid Level Sensor Realtime Fuel Level Monitoring Sensor For Truck

Advantage of Ultrasonic fuel level sensor
1. High accuracy.
Resolution of sensor’s measurement for fuel height is 0.1mm.And its measurement accuracy is ±0.5%. It keeps higher accuracy even in highest or coldest outside environment.
2. Excellent stability.
Being different from direct-contact measurement like float-type,pressure-type,magnetic sliding-type, untrasonic fuel level sensor adopts non-contact measurement, which can avoid pollution and corrosion from fuel and keep stability in a long period of time.
3. Easy installment and maintenance.
You only need to install the sensor probe on lower surface of fuel tank. You don’t need to change its original measurement system or punch hole for it. Its original fuel meter operates as usual.
4. No pollution and lower consumption.
This non-contact measurement and non-punch hole for fuel tank can keep off pollution from fuel.
5. High reliability.
It can still work in harsh environment and it is damp-proof, acid-proof, flame-retardant, anti-interference,and intelligent.This product can be used independently to check fuel level data from auxiliary display unit. It seamlessly integrated with GPS tracker which sends fuel level data to host computer for statistics data collection, and perform analysis and query.

Specification Details:

No.	Project	Introduction
1	Working Voltage	DC 9V~36V.
2	Working Temperature	-30~+75
3	Storage temperature	-40~+85.
4	Working humidity	5%~90%.
5	Maximum power consumption	0.8W/12VDC
6	Measurement accuracy	±0.5%;
7	Measurement resolution	0.1mm
8	Probe explosion-proof grade	Exia CT6 / Exd CT5
9	Probe Inbreaking Protection	IP66
10	Liquid level value unit	Millimeter
11	Measurement range	Depending on the material and thickness of the container. if 5mm thick steel plate, the measurement range is 5~100cm.
12	Peripheral interface	RS232 / RS485 / Analog transmission
13	Analog transmission	Voltage output:0-5V, 0-3V, 1-5V, 1-3V Linear relationship between liquid level and voltage output
14	Communication port parameter	Baud rate 9600, no parity bit, 8 data bits, 1 stop bit, no flow control. Sensor will smooth the height and temperature values, and transmits them every 10 seconds.All datas can be customized.

Product Introduction:
Ultrasonic fuel level sensor is a vehicle fuel monitoring device which is designed for the fuel management needs of company fleet. This sensor can be used to prevent the driver to steal fuel,optimize the operating costs,optimize the driver’s driving behavior and auxiliary statistical decision, etc. The sensor is equipped with a high precision ultrasonic probe, which can detect the fuel quantity in the fuel tank. Fuel quantity data will be sent to the server via GPS tracker,then generate the data report. Sensor support for serial and analog output, so, it can easily docking with other system.
Power on
* Input voltage is between 9V~36V.
* Sensor can be connected to the 12V or 24V car battary directly.
* Sensor has no built-in battery.

Interface introduction:

Paking Details:

Option Parts:

Q&A:

Q	A
LED1 and LED2 are not bright at the same time.	Ø There is no power supply, or the power supply voltage is not 9V~36V DC.
LED1 flashes red light, LED2 flashes green light.	Please check the probe and extension wire is inserted, and check whether the probe is pasted firmly. The liquid level height has been in the ultrasonic blind area.
LED1 flashes green LED2 flashes red.	Green wire connected incorrect. Disconnect the green wire , LED2 flashes green.
LED1 flashes green LED2 not bright	Power supply voltage is not 12V or 24V, Does not affect the normal use.
LED display screen does not bright.	Please check the connection between the display and the host is correct , and check the power supply;
The height displays is too large.	The liquid level height is in the ultrasonic blind area. Can be returned to normal after the rise of liquid surface height.
The height of the display shows suddenly dropped to “000.0”	This situation is normal; the display only shows real-time height, the liquid level fluctuation may cause the display shows 000.0, but it's not going to effect the serial port output or the analog output.
The height display shows is 1.1 times the height of the real-time liquid level	In different media, the transmission speed of ultrasonic is different. When measuring the height of the water(fuel), make sure that the program of the sensor is configured to measure the water(fuel);
After the liquid level is raised or lowered, the serial or analog output is not changed.	Sensor will output serial port or analog data since probe setting successfully.

Applications:
1. Vehicle Rental/Special Tracking System
2. Finance and Insurance Business Tracking System
3. Car Commanding and Dispatching System
4. Heavy Construction Vehicles Tracking Device
5. Shipping Cargoes Tracking

Pictures: