Post Offer Free
Shenzhen Keson Electronic Co., Ltd  

Gold Index: 8820

You are here: home  > IP66 0.8W 12VDC Water / Gas Tank Fuel Level Sensor With PVC Wire

IP66 0.8W 12VDC Water / Gas Tank Fuel Level Sensor With PVC Wire 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: Ultrasonic Fuel Level Senso...

High Accuracy Ultrasonic Fuel Level Sensor Working With GPS Tracking Device Realtime Fuel Monitoring SOS / Geofence
<stron

High Accuracy Ultrasonic Fuel Level Sensor Working With GPS Tracking Device Realtime Fuel Monitoring SOS / Geofence
 

Description:

1. High accuracy.
Resolution of sensor’s measurement for fuel height is 0.1mm.And its measurement accuracy is ±0.5%. It keeps higher accuracy even in highest or coldest outside environment.
2. Easy installment and maintenance.
You only need to install the sensor probe on lower surface of fuel tank. You don’t need to change its original measurement system or punch hole for it. Its original fuel meter operates as usual.
3. No pollution and lower consumption.
This non-contact measurement and non-punch hole for fuel tank can keep off pollution from fuel.
 


Specification Details:
 

No. Project Introduction
1 Working Voltage DC 9V~36V.
2 Working Temperature -30~+75
3 Storage temperature -40~+85.
4 Working humidity 5%~90%.
5 Maximum power consumption 0.8W/12VDC
6 Measurement accuracy ±0.5%;
7 Measurement resolution 0.1mm
8 Probe explosion-proof grade Exia CT6 / Exd CT5
9 Probe Inbreaking Protection IP66
10 Liquid level value unit Millimeter
11 Measurement range

Depending on the material and thickness of the container.
if 5mm thick steel plate, the measurement range is 5~100cm.

12 Peripheral interface RS232 / RS485 / Analog transmission
13 Analog transmission

Voltage output:0-5V, 0-3V, 1-5V, 1-3V
Linear relationship between liquid level and voltage output

14

Communication port
parameter

Baud rate 9600, no parity bit, 8 data bits, 1 stop bit, no flow control. Sensor will smooth the height and temperature values, and transmits them every 10 seconds.All datas can be customized.

 

 
Power on
 
* Input voltage is between 9V~36V.
* Sensor can be connected to the 12V or 24V car battary directly.
* Sensor has no built-in battery.
 
Interface introduction:


 
Paking Details:
 

 
Option Parts:
 

 
Q&A:

 

Q A
LED1 and LED2 are not bright at the same time. Ø There is no power supply, or the power supply voltage is not 9V~36V DC.
LED1 flashes red light, LED2 flashes green light.
  • Please check the probe and extension wire is inserted, and check whether the probe is pasted firmly.
  • The liquid level height has been in the ultrasonic blind area.

LED1 flashes green
LED2 flashes red.

  • Green wire connected incorrect. Disconnect the green wire , LED2 flashes green.

LED1 flashes green
LED2 not bright

  • Power supply voltage is not 12V or 24V, Does not affect the normal use.
LED display screen does not bright.
  • Please check the connection between the display and the host is correct , and check the power supply;
The height displays is too large.
  • The liquid level height is in the ultrasonic blind area.
  • Can be returned to normal after the rise of liquid surface height.
The height of the display shows suddenly dropped to “000.0”
  • This situation is normal; the display only shows real-time height, the liquid level fluctuation may cause the display shows 000.0, but it's not going to effect the serial port output or the analog output.
The height display shows is 1.1 times the height of the real-time liquid level
  • In different media, the transmission speed of ultrasonic is different.
  • When measuring the height of the water(fuel), make sure that the program of the sensor is configured to measure the water(fuel);
After the liquid level is raised or lowered, the serial or analog output is not changed.
  • Sensor will output serial port or analog data since probe setting successfully.

 

 
Applications:
1. Vehicle Rental/Special Tracking System
2. Finance and Insurance Business Tracking System
3. Car Commanding and Dispatching System
4. Heavy Construction Vehicles Tracking Device
5. Shipping Cargoes Tracking
 
Pictures:

 

bigPhoto
 Mr. Mrs. Jessice Hu

Tel: 86-755-83751711
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Shenzhen Keson Electronic Co., Ltd [China (Mainland)]


Business Type:Manufacturer
City: Shenzhen
Province/State: Guangdong
Country/Region: China (Mainland)

You May Like:

Product (168)